D-Link ShareCenter DNS-320L User Manual page 24

Section 3 - Installation
Power and Device Selection
Step. 8. -. Connect the power adapter connector to the power
receptacle on the back of the ShareCenter™ . Then, power on the
ShareCenter™ by pressing the power button located in the front
panel.
Click Next to continue.
Step.9.- With the power on, press the Next button on the device and
check and make sure the IP address of your ShareCenter™ matches
what you see on the screen.
Note: Allow 1-2 minutes for the DNS-320L to be recognized.
Click Next to continue.
DNS-320L 18
D-Link ShareCenter™ User Manual