Download Print this page

Setting Up Your Camera; Using Your Camera - Kodak CFH-V10 User Manual

Hide thumbs Also See for CFH-V10:

Advertisement

Setting Up Your Camera For the First
Time
1.  From your smartphone, download the
iSecurity+ app from the Apple App Store
or the Google Play store.
2.  Connect your KODAK Video Monitor to
the supplied AC power adaptor and plug
the cord into an electrical outlet.
3.  Once plugged in, flip the switch on the
back of your Camera to the "SETUP"
position. Wait up to 2 minutes for the
middle LED to flash green.
4.  Enable Wi-Fi on your smartphone, as
well as your home Wi-Fi network.
5.  Open the Wi-Fi settings on your
smartphone and connect to the network
"CFH-V10XXXX", where XXXX are the last
4 digits of your Camera's MAC ID as
seen on the back of your Camera.
6.  Once your smartphone establishes
connection to "CFH-V10XXXX", launch
the iSecurity+ app. When prompted,
click "Yes" to setup your camera. The
Setup Wizard will guide you through the
remainder of the setup process.
Accessing From Your Mobile Device
Launch the iSecurity+ app. Click on your
Camera's name to start live video.
Once in the live view, there are a few actions
you can take:
Take a snapshot of the live video.
Snapshots are stored in your
smartphone's Gallery.
Record live video. Videos are stored
in your smartphone's Gallery.

SETTING UP YOUR CAMERA

USING YOUR CAMERA

Setting Up Additional Cameras on the
Same Account
1.  Follow the same instructions in "Setting
Up Your Camera For the First Time".
2.  In the Setup Wizard, when prompted to
create a new account, simply choose
"Use Existing".
3.  Enter the credentials of your existing
account to complete setup of your
additional Camera.
Setting Up Your Camera Again
If you change your home router, you will
need to set up your Camera again. To do so,
follow steps 2 – 6 in "Setting Up Your
Camera For the First Time".
Factory Resetting Your Camera
1.  Insert a pin into the small hole in the back
of your Camera.
2.  Press firmly and hold for 15 seconds.
3.  Once the LED lights flash, release the
pin.
You will need to set up your Camera again.
Turn on audio to accompany your live
video stream.
Hold to initiate audio talkback. Your
audio must be turned on to do so.
You can pinch your smartphone's screen to
zoom in and out, and swipe your screen to
pan and tilt.
Accessing From Your Computer
Go to https://app.isecurityplus.com. Click on
your Camera's name to start live video.

Advertisement

loading