Operation Panel - Sharp AR-5415 Operation Manual

OPERATION PANEL

Exposure mode selector key and
1
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.15)
Light and dark keys and indicators
2
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.15) Use to start
and terminate user program setting. (p.19)
Alarm indicators
3
Developer replacement required
indicator (p.31)
Misfeed indicator (p.28)
Toner cartridge replacement
required indicator (p.21)
Maintenance indicator (p.31)
Copy ratio selector key and
4
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.17)
Copy ratio display (%) key (p.17)
5
Display
6
Displays the specified copy quantity,
zoom copy ratio, user program code,
and error code.
Power save indicator
9 7
Lights up when the unit is in a power
save mode. (p.18, p.19)
Paper feed location indicators
10 8
Light up to show the selected paper
feed station.
6
AR-5415
ZOOM keys and indicator
11 9
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (p.17)
Copy quantity keys
12 10
• Use to select the desired copy
quantity (1 to 99). (p.15)
• Use to make user program entries.
(p.19)
Clear key
13 11
• Press to clear the display, or press
during a copy run to terminate
copying. (p.15)
• Press and hold down during standby
to display the total number of copies
made to date. (p.20)
Start key and indicator
14 12
• Copying is possible when the
indicator is on.
• Press to start copying.
• Use to set a user program. (p.19)