Troubleshooting - Sanyo VMC-L1015 Instruction Manual

Specifications
Model
VMC-L1015/L1015P
VMC-L1017/L1017P
VMC-L1019/L1019P
View angle
System Model
VMC-L1015
VMC-L1017
NTSC
VMC-L1019
VMC-L1015P
VMC-L1017P
PAL
VMC-L1019P
About the tilt adjustment
The screen may be adjusted 5° forward and 40° backward.
When adjusting the screen tilt, use a soft cloth to prevent damaging the screen.
After adjusting the tilt, check the cables to ensure the monitor is not pulled over.

Troubleshooting

Before requesting service or repair, perform a check as described in the following section. If this does not
work, return the unit to the place of purchase or authorized repair agent to undergo adjustment.
Problem
No image is displayed.
No sound is heard.
The display is dark.
The display is flickering.
Colors displayed in different
parts of the display are
strange.
There is a hissing noise.
When 2 or more monitors
are next to each other, the
display shakes or there is
some distortion.
11
English
A B
353.2 305.2 229.1
375 341 273.4
421.2 379.4 304
Left/Right
70°/70°
75°/75°
75°/75°
70°/70°
75°/75°
75°/75°
• Is the connected device outputting a video signal?
• Is the connection correct? (Page 5)
• Using the input mode control (MODE), is the correct input signal
selected? (Page 6)
• Is the connected device outputting an audio signal?
• Is the connection correct? (Page 5)
• Check the volume level is not set to 0. (Page 6 – 8)
• Are the brightness and contrast set to the correct level? (Page 6 – 8)
• Is there a device nearby which is emitting a strong magnetic field? If so,
remove it.
• Is there a speaker or magnet nearby?
After removing the object, turn the unit off for at least 30 minutes and
switch it on again.
• Effects of this type may be caused by temperature changes in the room
but do not indicate a fault.
• The monitors are interfering with each other. Increase the distance
between them.
C D E
286 338
318 370
353.6 405.6
Up/Down
60°/65°
70°/60°
70°/60°
60°/65°
70°/60°
70°/60°
Points to check
F G H
36.4
52 41.6 170
44.6