Transportation; Installation - Hotpoint Ariston DSRLAAV22S.1 Operating Instructions Manual

Installation
Transportation
&
Caution: 2 people are required to
unpack and handle the appliance, it is
recommended that gloves are worn.
• The appliance should be transported only in
an upright position. Do not tilt the appliance
greater than 45°. The packaging as supplied
must be intact during transportation.
• After transporting the appliance, leave it for at
least 4 hours before switching on to allow the
cooling system to settle. Failure to comply
could result in damage to the appliance.
• Do not move the appliance by pulling the door
or
handle
as
jt
way dar:¥:1.9'i y01.1r flggriR!) anQ
wall coverings etc.
• Empty any water in the drain tray before
moving.
• Ensure the supply cable is not caught under
the appliance during and after moving.
• Carefully remove all packaging materials
including the foam base, dispose of correctly.
Installation
• Ensure sufficient spacing is provided for the
appliance to be installed. Leave space on both sides
and above the appliance to ensure proper ventilation.
• Do not place the appliance near a heat source
or in direct sunlight.
• Do not put any heavy objects on top of the
appliance. It will damage the appliance.
• Do not install the appliance in moist and wet
place.
• Adjust the feet at front to level the appliance.
It should be installed on a smooth surface to
avoid excessive vibration and noise.
• Each appliance has a climate class (shown on
the rating plate) where it indicates the
temperature range of the appliance operation
in place is 16°C to 38°C. The. appliance
may not work properly if it is left for a long
period at a temperature outside the specified
range.
• Refer to section "Care and Maintenance" to
prepare your appliance for use.
II
Hotpoint
•
2