Maintenance; Technical Specifications - Goldmund Mimesis 16.8 User Manual

ATTENTION:
The Mimesis 16.8 does not have an input
selection switch between USB CONTROL and
the RS232 connector. Only one connection can
be used at once for an external control. The
USB CONTROL has the priority.
To load a configuration the USB CONTROL
must be used.
3

MAINTENANCE

To clean your Mimesis 16.8 use only a soft, clean, dry or slightly damp cloth. Avoid using
domestic cleaning products.
There are no user serviceable parts inside the Mimesis 16.8. Unauthorized servicing or
alteration invalidates the manufacturer's warranty.
All enquires relating to product servicing and operation should be referred to the local
authorized retailer supplying and supporting your Goldmund equipment.
WARNING
Always turn the power off before cleaning your acoustic processor.
4

TECHNICAL SPECIFICATIONS

INPUTS
•
10 digital inputs:
- In1 RCA spdif
- In2 Toslink optical
- In3 RCA spdif / XLR aes-ebu
- In4 Toslink optical / RCA spdif
- In5 RCA spdif
- In6 USB AUDIO (up to 96kHz / 24bit pcm stereo only)
- In7 to In10 HDMI input
- USB CONTROL, used for configuration
- RS232, external control system
Any inputs from 1 to 6 and 7-10 can receive multi-channel encoded signal and
audio signal up to 96kHz.
GOLDMUND MIMESIS 16.8 - UNIVERSAL ACCOUSTIC PROCESSOR - 12