Advertisement
-
Blending comb with cutting length of 2mm for hair and beard trimmer
-
To attach the attachment combs to the trimmer, simply slide the comb over
the trimmer head with the teeth to the front of the trimmer head. Then press
the comb toward the trimmer to click in place. See below figure.
For selecting the cutting length, press the Centre knob of comb and then push up and
down for the desired length. Release the centre knob, the comb is locked to the
desired length.
GUIDE TO CLIPPING
• Hold the clipper with a relaxed, comfortable grip.
• Cut the hair in a relaxed and slow manner. Use short strokes, working
gradually over the entire head.
• Always take off a little hair at a time, you can always trim additional hair later.
• Frequently comb the hair.
• Whilst cutting, hair may collect on top of the cutting comb. Frequently shake
excess hair from the clipper, in order to maintain the speed of the motor.
CLEANING AND MAINTENANCE
1
Switch the clipper off, ensure it is unplugged from the mains and charger.
2
Remove hair clippings from the interchangeable heads and/or attachments
using the brush provided.
3
Wipe over the casing and attachments using a damp cloth. Only the
attachments can be rinsed under running water. But do not immerse the unit in water
or any other liquid.
4
Ensure all parts are dried thoroughly with a soft towel.
5
Do not use harsh abrasives or cleaners.
6
Hair clippings should be cleaned from the clipper after every use.
Warning: Keep the Appliance Dry.
CLEANING AND MAINTENANCE continued
6. To ensure this product continues to give excellent performance and remains in
pristine condition, it is recommended that the hair trimmer ceramic blades
(head number 1) are oiled every 6 months, or before storing for long periods. 3
drops of oil should be added to the beard trimmer and etching and defining
blades (head numbers 2 and 3) before every use.
Advertisement
