Advertisement
INSTRUCTIONS FOR USE
Please read and retain these instructions before operating for future reference.
1
Remove all packaging and keep safe until satisfied with your product.
2
Charge the clipper as described below.
3
Before initial use, oil blades by adding 3 drops of oil. Ceramic blades ensure
longer use of the blades.
CHARGING THE CLIPPER
1
Ensure the on/off switch is off by pushing the switch downwards.
2
Insert the charger lead into the charge connection at the bottom of the hair
clipper. Alternatively insert into the stand and place the clipper firmly into the charge
connection on the stand.
3
Plug the AC/DC charger adaptor into a suitable mains supply and switch on.
The charge light on the clipper will illuminate.
4
Never leave the charge plugged in when not in use. Future charging should
take approximately 12 hours. After the initial charging, do not leave charging for
more than 12 hours.
Good practice is to recharge the unit occasionally, not daily.
CHARGING THE CLIPPER – continued...
Do not charge for longer than the recommended time. Over charging will reduce the
working life of the rechargeable battery. Occasionally let the battery run down
completely before recharging to maintain it's life period.
MAINS OPERATION
When the batteries are run down it is possible to use this appliance from the mains via
the charge adaptor. Never use the charge adaptor in the bathroom or near any source
of water. Insert the charger lead into the bottom of the clipper. Allow 5 minutes
before continuing to use.
USING THE HAIR TRIMMER
1
Place a towel around the neck and shoulders of the person having the haircut.
2
Seat the person so their head is approximately at your eye level. This allows
ease of visibility while cutting and a relaxed hold on the unit.
3
Before cutting, comb the hair so it is tangle free and brushed in the direction
of growth.
4
Attach the hair trimmer (head number 1), by clicking it into place. Always
ensure the clipper is switched off when changing heads and attachments.
Advertisement
