SPECIFICATIONS - NAD AV 711
Amplifier section
Power Output:
distortion)
Total Harmonic Distortion
IM Distortion
Damping Factor
Sensitivity and Impedance
Frequency Response
Signal to Noise ratio
Tuner section
Input Sensitivity
Frequency response
Total Harmonic Distortion
Stereo Separation
Signal to Noise Ratio
Physical specifications
Dimensions (W x H x D)
Net weight
Shipping weight
NOTE: NAD resrves the right to change specifications or design at any time without notice. All specifications sre those in effect at time of printing.
Dolby and Pro Logic are registered trademarks of the Dolby Laboratories Licensing Corporation
Stereo Mode:
2 x 40 Watts (8 ohms within rated
2 x 60 Watts IHF dynamic power 8 ohms
2 x 90 Watts IHF dynamic power 4 ohms
2 x 115 Watts IHF dynamic power 2 ohms
Surround Mode:
3 x 40 Watts (L, C, R)
20 Watts (10 + 10) (S)
0.08% at rated power (Front)
0.08% at rated power (Front)
60 at 8 ohms (Front)
150 mV/ 50 kohms
5 to 50,000 Hz:
± 1 dB
Line:
100 dB (IHF A)
1.3µV Mono; 2.5µV Stereo
30Hz - 15kHz:
± 1.5dB
Mono: 0.15%; Stereo: 0.25%
45 dB at 1 kHz
Mono: 73 dB; Stereo: 67 dB
435 x 145 x 290 mm
9.3kg
10.5kg