Functional Description; Name Of Parts; Specifications - Hitachi DH 40FR Instruction Manual And Safety Instructions

FUNCTIONAL DESCRIPTION

NOTE: The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read
and understood all safey instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that
differ from those on your own power tool.

NAME OF PARTS

Drill Bit

SPECIFICATIONS

Motor
Power Source
Current
Capacity
No-Load Speed
Full-load Blow
Weight
Stopper
Side Handle
Tool Holder
Tail Cover
Single-Phase, Series Commutator Motor.
Single-Phase, 120 V 60 Hz
9.2 A
Drill Bit: 1-9/16" (40 mm)
Core Bit: 4-1/8" (105 mm)
240 – 480/min
1320 – 2650/min
14.3 lbs (6.5 kg)
Selector Lever
Housing
Set Screw
(Under the
Brush Cap
Tail Cover)
(Inside the Tail Cover)
Fig. 1
Switch Trigger
Nameplate
Handle
Dial
English
7