Save A Recording On Another Equipment - SAGEMCOM DTR 6400T User Manual

DTR67_ EN.book Page 33 Mardi, 20. avril 2010 2:46 14
10-5-11 Erasing a portion of a recording
The receiver comprises an advanced editing function that enables you to:
- erase a portion of a recording from the beginning to a point that you specify manually,
- erase the portion of a recording between two points that you specify,
- erase the portion of a recording between the current playing position to the end of the recording,
- cut a recording into two parts.
Select, in the recording list, the recording to edit and press
At the desired position, press the
Press the key then press the
Select the desired cut option then press
- at the beginning: the recorded portion
between the beginning and the selected point
will be erased (2 minutes minimum).
- in the middle: the part of the recording
between the selected point (index) and the
next selected position will be erased.
To choose the next position: confirm the "in
the middle" option by pressing
within the recording with the keys
and press
position.
Press then
cut option "in the middle" to cut the selected portion.
- at the end: the part of the recording between the selected point and the end will be erased.
- in two parts: the selected recording is cut into two parts called "1 recording name" and "2 recording
name".

10-6 SAVE A RECORDING ON ANOTHER EQUIPMENT

Attention, such copying is legal only if it is intended for a strictly private use.
Connect your video recorder on the AUX Scart socket of the receiver (see "Peripheral connections",
page 9).
Select this input on your video recorder.
Select play mode on the receiver and record mode on the video recorder.
Refer to the video recorder instruction manual for details on the procedure to follow.
key to pause.
key to access the cutting options.
:
, move
and
to mark the second
and again confirm the
- 33 -
to commence playing.