Information; Antenna Signal; Receiver; Hard Disk - SAGEMCOM DTR 6400T User Manual

DTR67_ EN.book Page 16 Mardi, 20. avril 2010 2:46 14

8. INFORMATION

The information contained in this menu may be requested if you contact your supplier or another service
(Maintenance for example).
You will thus find here information about the receiver, the embedded software, the capacity of the hard
disk, as well as a utility that lets you to diagnose the signal reception of the antenna.
To access the receiver technical information, press In the main menu, select TECHNICAL
.
INFORMATION .

8-1 ANTENNA SIGNAL

In TECHNICAL INFORMATION, select ANTENNA SIGNAL INFORMATION.
Enter a value in the CHANNEL line then press to find out the signal level and quality of this channel.
If the level and quality of reception are insufficient, adjust your antenna to obtain a better signal.
If you use an active indoor antenna (with an amplifier), activate via the receiver the power supply of the
antenna if it requires a 5V power voltage (50mA max.).

8-2 RECEIVER

In TECHNICAL INFORMATION, select PRODUCT DATA.
This menu provides information on the receiver software.

8-3 HARD DISK

In TECHNICAL INFORMATION, select HDD INFORMATION.
The estimated remaining time for recording on the hard disk is given for information only, as the capacity
depends on the sound and video quality of the recorded programme (the quality of sound and image
varies depending on the programmes).
- 16 -