Tuner Control; Cd Player Control - NAD C 320BEE Owner's Manual

Stereo integrated amplifier
Hide thumbs Also See for C 320BEE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Other than the commands relating to the NAD C320BEE amplifier itself,
there are other buttons, which will operate most NAD CD players and
Cassette decks equipped with IR link.

TUNER CONTROL

(for use with NAD Tuner)
Switch the small slider-switch to TUNER (at the base of the remote) to
control the numeric keypad 1 through +10
The TUNER button selects between AM and FM.
TUNE MODE in conjunction with
between number station preset and scanning for stations.

CD PLAYER CONTROL

(for use with NAD CD Player)
Switch the small slider-switch to CD (at the base of the remote) to
control the numeric keypad 1 through +10
engages Pause.
engages Stop.
engages Play or toggles between Play and Pause.
or
engages Track skip; Press once to respectively go the next
track or to return to start of current or previous track.
NEXT DISC Go to next disc (for NAD CD changers).
NOTE
Direct sunlight or very bright ambient lighting may affect the
operating range and angle for the remote control handset.
or
selects respectively
1 Press inand lift tab to remove battery cover from recess
2 Place batteries into recess. Ensure that the alignment of the batteries
3 Replace battery cover by aligning and inserting the two tabs into the
matches the '+' and '-' symbols on the casing.
holes. Press battery cover into place until it clicks closed.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents