Table of Contents
Advertisement
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
4 seconds. The indicator next to the symbol
10 seconds. The hob is locked.
To deactivate: press the symbol
4 seconds. The lock is now deactivated.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Restrictions when using
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see diagram).
Otherwise, the
and
symbols will flash on the display of the
›
Š
selected hotplate; then the power level
*URXS
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
Select the desired hotplate and power level.
1.
Press the
0
symbol. The
2.
up.
lights up in the time program function display.
‹‹
/
for approximately
‚
$
/
lights up for
‚
$
/
for approximately
‚
$
.
Š
is automatically set.
Š
*URXS
x
indicator on the hotplate lights
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
To activate
Select a hotplate.
1.
Press the
symbol.
›
2.
The
›
indicator lights up.
The function will have been activated.
To deactivate
Select the hotplate.
1.
Press the
›
symbol.
2.
The
indicator will disappear and the hotplate will return to
›
power level
.
Š
The Powerboost function will have been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Within the next 10 seconds, select the desired cooking time
3.
in the programming zone. The possible default setting is,
from left to right: 1, 2, 3, etc., up to 10 minutes.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
11
Advertisement
Table of Contents
