Subscribe to Our Youtube Channel
Related Manuals for Godrej E-SWIPE
Summary of Contents for Godrej E-SWIPE
- Page 1 E-SWIPE (Hotel Mode) User Instructions Note: Home users may switch to home mode as per instructions given on page no 2 Be Intelligent. Be Safe.
- Page 2 1. Display a. Allen Key for cover 2. Keypad removal 3. Magnetic Card Swipe b. Override Keys 4. Godrej Logo/Override Key c. Nut Bolts for anchoring 5. Motorised Steel Bolts d. Mat 6. Easy to access battery e. Warranty Card compartment f.
- Page 3 IMPORTANT INSTRUCTIONS Please keep this manual and override keys in a • safe place (NOT INSIDE THIS SAFE) Make sure the safe is anchored properly as it • can fall and hurt people and property DO NOT use any liquid while cleaning the •...
- Page 4 HOTEL MODE OPERATION Be suitable especially for hotel use 1. To open the safe: Enter personal code and slide the magnetic card if any, which was entered while locking the safe. When the display shows “OPEN”, the bolts will retract automatically.
- Page 5 TO CHANGE THE PERSONAL CODE AND MAGNETIC CARD IN SAFETY MODE 1. Open the safe. 2. Press CLEAR(*) twice, display will show “PROG”. 3. Press 68 LOCK(#), display will show “NEU”. 4. Enter new personal code and press LOCK(#), the Display will show “GOOD”. Then slide the magnetic card with the magnetic strip facing down.
- Page 6 HOT KEY – Viewing/Not Viewing Password While Keying In: If your lock is set so that your code appears and you need it to not appear one time, you can press (0) then LOCK(#) key before your code. Only dashes will appear for that one time. The next time you press your code it will appear as usual.
- Page 7 Press 0: To turn OFF the master code feature. Press 1: To turn ON the master code feature. (Default) Section 4 (6 Digit) Operational mode This feature allows you to change how the safe operates. Press 1: To set for Home Mode. (Default) Press 2: To set for Hotel Mode.
- Page 8 MOUTING Mounting Through the Bottom of the Safe: Check the floor for what type it is (wood, tile, concrete) • Get the appropriate anchors for the type of floor • Check location on floor for concealed wires or pipes • Mark the floor to drill for your anchor •...
- Page 9 9. Dispose the used batteries in an environment friendly way. EMERGENCY OVERRIDE KEY 1. Using the supplied Allen key unscrew one of the screws holding the Godrej plate and rotate to expose key cylinder. 2. Using one of the override keys, insert into the cylinder and turn clockwise to open the safe.
- Page 10 ERROR MESSAGES Listed below are error codes you might encounter: This means that you have entered an incorrect personal ERROR code or magnetic card. Verify your personal code and try again. If you get this error four times consecutively, the keypad will lock out for 0/3/15 minutes.
- Page 11 These rules apply to every producer; consumer or bulk consumer involved in the manufacture, sale, and purchase and processing of electrical and electronic equipment or components as specified in Schedule 1 (please refer to our website www.godrej.com in the ‘Good & Green’ section of CSR module for more details).
- Page 12 Email: secure@godrej.com. Website: www.godrejsecure.com In view of the Godrej policy of continuous development and improvement, the dimensions and specifications may be changed without prior notice or obligation. The colours of the product in leaflet may not match the actual colours due to printing limitations.
Need help?
Do you have a question about the E-SWIPE and is the answer not in the manual?
Questions and answers