Table of Contents
Advertisement
When the time icon is flashing, press the enter key to enter
the time interface.
Time
Time setting
Date format
setting
Return
1. The default date is December 12th,2014,the time is
12:00PM and the week is Friday. Adjusting settings is the
same way as schedule adjusting.
2. The default format is 12-hour and Month/Day/Year.
Extra Function
Press the enter key to enter the setting interface when the
icon is flashing in the menu.
1. The default information for each function is decided by
indoor unit except child lock. Child lock function is off by
default.
2. Move the arrows using the Up/Down or Left/Right key.
Arrows will display statically when you press enter key. Press
the Left/Right key to choose "ON" or "OFF". After setting,
press Up/Down key to confirm and move to the above or
below function directly or press the enter key to set again.
3. The corresponding function icon will display in the main
interface when a function is set in extra function.
4. Some functions are not available for some models. These
will be greyed out. Turbo and Quiet function conflict and
can't both be on. Setting one will disable the other. This is
the same for health airflow up and down.
5. Important: When child lock is set to ON, the interface skips
to the main display automatically. The function also can be
set or canceled by pressing the Left and Right keys together
for 5s in the main interface.
Extra Function
Quiet
ON
Turbo
OFF
Child lock
NO
Forced
OFF
defrost
Return
Page 6
Time
10:30
Thursday
01.01.2015
AM
2015
11
30
year
month
day
9
35
Mon.
AM
hour
minute
week
12-hour
24-hour
Year/Month/Day
Month/Day/Year
Day/Month/year
Enter
Main
10:30
Thursday
01.01.2015
AM
Ventilation
ON
Health
OFF
Quick start
NO
Night quiet
OFF
Enter
Main
WIRED CONTROLLER
Error Code
Press the enter key to enter the error code display interface
when the icon is flashing in the menu.
1. Up/Down key to choose the unit. Left/Right key to change
pages.
2. One current error code will display and up to thirty five past
error codes will display for each unit.
3. Press the Left and Right keys together for 5s to clear away
the error history information of the current unit. Press
Up and Down keys together for 5s to clear away the error
history information of all the units on line. The combination
method is only valid in error interface.
Error Code
Current error
Error code:017
Error code:017
Error code:013
Error history
Error code:012
Error code:006
Return
Service Help
Press the enter key to the service help interface when the icon
is flashing in the menu.
1. Password function includes password setting and recovery.
The default password is 841226. When finished entering
password, press direction key to cancel or enter, then press
enter key to confirm, or continue to press enter key to
confirm after inputting six numbers.
Service & Help
Password
Password setting
Password recovery
How to set child lock?
How to set four-way cassette angle?
Help
How to inquire error codes?
How to clean filters?
Return
1. If password recovery is set, the interface will prompt as
follows, then cancel or enter.
Do you really want to password
recovery?
Cancel
1. Help function is available for only some models. The
information is gray when it is not available.
10:30
Thursday
01.01.2015
AM
20/08/2014
11:20
18/08/2014
15:35
10/08/2014
23:14
20/05/2014
09:37
27/10/2013
13:56
Enter
Main
10:30
Thursday
01.01.2015
AM
Enter
Main
Enter
Hide quick links:
Advertisement
Table of Contents
