Table of Contents
Advertisement
Running time
The function records both continuous running time and total
running time. When the bottom color of "Clear" changes to
white, press enter key to clear the accumulative running time.
Running Time
Continuous Running
Time
Total Running
Time
Return
Vip priority choice
The function is only available for some models.
Special setting
When the thermostat is connected to duct type indoor unit,
the thermostat will detect the available speeds (static) the
unit is capable of.
For example, if the unit only have 4 static setting, then it will
only show 1-4. The static pressure range can be referenced in
the service manual of the corresponding indoors.
Parameter setting
The function is only available for some models.
EEPROM setting
The function is only available for some models.
Motion sensing
The function is available for some models. When motion
sensing follow or evade is set, the angle of the deflector will
be decided by the person's current location, the setting swing
angle in the main interface is invalid at this time. When the
function of automatic power off is set, indoor unit will power
off after sensing nobody in the room for the setting time. All
the functions in the interface are "OFF" by default.
Motion sensing
Power off
when sensing
nobody in
Motion sensing follow
Motion sensing evade
Return
Page 10
10:30
Thursday
01.01.2015
AM
0014:22:53
Clear
0037:10:26
Clear
Enter
Main
10:30
Thursday
01.01.2015
AM
10
15
mins
mins
30
OFF
mins
ON
OFF
ON
OFF
Enter
Main
WIRED CONTROLLER
Hide quick links:
Advertisement
Table of Contents
