Table of Contents
Advertisement
SECTION TWO
Standard Microprocessor Control Panel
CONTROL KEYS (Fig 1)
I - 0 Switch (A)
Switches on the control circuit.
Start LED (B)
Indicates that the control circuit is on.
Door Opening Indicator (C)
Illuminates at the end of the cycle, signaling the safety lock is released.
Report Display (D)
Indicates the wash programme function, and other machine information.
Programming key PROG (E)
Permits configuration of options
Cycle Advance Key ACCEL (F)
Allows the function to extend or reduce the programme duration.
Programme and Options Selection keys + / - (G)
Permits the selection of programme, or the configuration/modification of options.
LEDS indicating the programme phase (H)
Indicates the programme format and intermittently the phase being executed.
Programme Start-Stop Key START/STOP (J)
Initiates (Starts) or stops the programme being executed.
4
Advertisement
Table of Contents
