Table of Contents
Advertisement
2.6 ALTERING A PROGRAMME
The following procedure describes how to alter the programme, should you wish to
amend some of the options. The changes must be entered before the
programme is started. Any changes made will revert to the original format when
the programme has finished.
If the machine is stopped or another programme is selected, the alterations are
cancelled and the machine will revert to the original programme format.
Options that can be amended:
2.6.1 Main Wash Temperature
Enables the temperature of the main wash to be raised or lowered from 0°C to
90°C.
2.6.2 Economy 1 or 2
Reduces the water levels during the wash and rinses, thus saving energy and
conserving water.
2.6.3 Synthetic Option
Progressively cools down the water at the end of main wash if the water
temperature was above 45°C.
(Some fabrics are prone to thermal shock which occurs when directly immersed
in cold water from a high temperature).
2.6.4 Extract Cancellation
For the protection of delicate fabrics, the extract can be cancelled. The machine
will drain but not spin.
2.6.5 Crease Guard
Halts the programme in final rinse, leaving the washing immersed in water.
To continue, press Start and the programme enters final extract (drains and spins).
To access a Programme to be Altered
Machine display must show SEL
Press + or - keys and display shows Pr and the number of the previous
programme.
Press + or - keys to scroll through the programme options 1 to 8, stopping
at the desired programme.
To make the alteration, press PROG key.
WASH TEMPERATURE (Ref 2.6.1)
The display shows the temperature of the main wash in °C
Options available:
Press + or - to raise or lower the main wash temperature.
Pressing PROG key confirms the alteration and advances to the next step.
0°C to 90°C
13
Advertisement
Table of Contents
