Table of Contents
Advertisement
- Selecting a Programme
Press + key: The display shows Pr and the number of the last programme to run.
Use the + and - keys to select the required programme.
NOTE: The format of the programme determines which phases are used (prewash,
main wash, number of rinses, and final extract) illuminating the corresponding
L.E.D. in column H.
- Altering the programme
Any alterations to the programme can now be entered (Ref 2.6) -
Press Start
The display shows PrE/STAR while the door safety lock engages. After 40
seconds the machine will start the programme.
NOTE: During the cycle the function currently operating is displayed in
sequence:-
A
Water fill
d
•
Detergent, bleach, conditioner dosing
C
•
Temperature ° C
F
•
Temperature °F
rt
•
Time to completion of wash phase
c
Synthetic cool down
E
•
Drain time
Et
Time to completion of spin (extract)
The phase in operation is indicated by flashing the corresponding L.E.D (11).
Accel Key
Providing the option has been configured (AC-1) the Accel Key enables the wash
and extract times to be extended by using + key or
To shorten the wash and extract times and advance the programme to the next
function by using the - key.
End Programme
On completion of the final extract, the machine automatically engages a safety
count down of 150. This is to allow the drum to stop spinning before the door can
be opened.
Display shows: END
The green (door) L.E.D. is on.
19
Advertisement
Table of Contents
