A. Spark plug gap
When installing the spark plug, always clean the gasket
surface and use a new gasket. Wipe off any grime from
the threads and tighten to the specified torque.
Tightening torque:
12.5 Nm (1.25 m.kg, 9.1 ft.lb)
AIR FILTER CLEANING
The air cleaner accumulates dust and must be cleaned
periodically. If the ATV is ridden in dusty areas, the air
cleaner must be cleaned at more frequent intervals than
specified in the Maintenance Schedule. If the ATV is
submerged in water, the air cleaner should be checked
and water should be drained from the air cleaner housing
before starting the engine.
To Clean The Air Cleaner
.
1 Remove the air cleaner from the carburetor by
loosen the screw
PERIODIC MAINTENANCE AND ADJUSTMENT
.
-
8 9