Specifications - NAD C715 DAB Owner's Manual

REFERENCE

SPECIFICATIONS

AMPLIFIER SECTION
Total harmonic distortion at rated power
Input sensitivity and impedance (Tape IN)
TUNER SECTION
AM SECTION
FM SECTION
DAB SECTION
CD SECTION
Frequency response (ref. 0db 1khz, 20hz-20khz)
Total harmonic distortion (ref. 1khz, VIDEo oUT)
Signal/Noise ratio (A-weighted, ref. 1khz VIDEo oUT)
PHYSICAL SPECIFICATIONS
Note: Gross dimensions include feet, extended buttons and rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 715 DAb.
6
Power output Stereo Mode
IhF dynamic power (6 ohms)
Damping factor (6 ohms)
Frequency response
Signal/noise ratio,
Signal/noise ratio
Tuning range
Usable sensitivity
S/N ratio
Total harmonic Distortion
Selectivity
Frequency response
Tuning range
Usable sensitivity, MoNo
S/N Ratio MoNo
S/N Ratio STEREo
Total harmonic Distortion, MoNo
Total harmonic Distortion, STEREo
Frequency response
Channel Separation
RDS decode sensitivity
Tuning range
Maximum signal
Sensitivity
Adjacent Channel Rejection
Audio output Stereo
optical S/PDIF
output level
Channel balance (ref. 0db 1khz)
Dynamic range (A-WTD, VIDEo oUT)
Channel separation
Dimensions (W x h x D)
Net weight
Shipping weight
25W (6 ohms within rated distortion, 1khz)
28W
0.15%
>102
370mV/27kΩ
+1 db/-3db (Ref. 1 khz, 10hz – 80khz)
95db (Ref. rated power/ 6 ohms A-WTD)
80db (Ref. 1W / 6 ohms A-WTD)
520khz -1710khz (North America version, 10khz steps)
522khz -1629khz (Europe version, 9khz steps)
60dbuV
40db
1.5%
25db
-6db (Ref. 400hz, 80hz – 2.2khz)
87.50Mhz – 108Mhz (50khz steps)
10dbuV
60db
55db
0.3%
0.5%
-3db (Ref. 1 khz, 30hz – 12khz)
35db
29dbuV
band III 174Mhz – 240Mhz
-3dbm
-96dbm
-35db
2.5Vp-p
24 bit sample resolution
48khz sample rate
1.16V
+1db
0.04%
100db
0.5db
82db
78db (1khz)
78db (10khz)
213 x 103 x 324 mm (Net)
213 x 116 x 362 mm (Gross)
4.5kg
6.0kg