Controls - Electrolux ICON series Use & Care Manual

LED COLORS / Assembly
IQ-Touch
TM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
fast freeze Activates a faster rate for freezing food.
fast ice
Increases the production of ice
energy saver Keep this switch set on energy saver (light on) for lowest energy usage. If moisture ap-
pears on the cabinet between the doors, pressing this button will turn the light off and
enable an electric heater used to reduce moisture on the cabinet between the doors.
water filter Press and hold for three seconds to reset after filter change.
air filter Filter condition status is always displayed when door is open. Press and hold for
three seconds to reset after filter change.
temp mode Touch to toggle display from Fahrenheit to Celsius.
mute sounds Tones emitted by each key press can be turned off based on user preference. The
sounds are muted when the red indicator is lit. Warning signals will stay active.
default settings Resets all refrigerator settings such as temp, temp display and tones to their factory
default settings.
on off Press and hold for three seconds to turn off the cooling system to clean the refrigera-
tor. It also turns off the ice maker. The temperature displays will read OFF.
IMPORTANT
Pressing the system on/off icon does not turn off power to your refrigerator.
You must unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will
time out after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm will sound and
the door ajar indicator will display on the bottom display of the control panel. The
alarm is turned off by closing the door. The mute sounds key will blink to prompt the
reset of any active alarms. Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the temperature display will blink and
display "HI". After 20 minutes, the alarm will sound and the high temp indicator will
be red on the bottom of the control panel. The mute sounds icon will illuminate until
pressed, acknowledging the alarm, at which time the highest temperature reached
will be displayed and the refrigerator will resume normal operation. In case the high
temp alarm is not acknowledged at the first alarm sound time out, when the door is
first opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed and the tem-
perature display will blink until the mute sounds icon is pressed, acknowledging the
alarm. Other modes may be turned off until the alarm is acknowledged. The power
fail alert is turned off and the refrigerator will resume normal operation. The high
temp alarm may also be illuminated until a safe operating range temperature has
been reached.
13

Controls