Advertisement
1. Unpack and inspect fan carefully to be certain all contents are
included.
Mounting
Bracket
Canopy
Downrod
Assembly
Yoke Cover
2.
Turn off power at the breaker
box to avoid possible
electrical shock.
5. Yoke & Downrod Assembly
Canopy
Jam Screw
Yoke Cover
Cross Pin
Yoke
Set Screw
with Hex Nut(2)
Up Glass Shade
Up-Light
E-12, 15W x 4pcs.
Fan Assembly
Down Glass Shade
OF F OF F OF
F
3.
Use a metal outlet box suitable for
fan support.
Be sure that the box can support
a minimum weight of 40 pounds.
Secure the outlet box directly to the
building structure using wood
screws (provided).
Downrod Assembly
Wire Connectors
from Yoke Cover
Wire Connectors
from Fan
Cotter Pin
Remote Control
Transmitter
Suitable for use with solid - state
speed control
Bulbs
Hardware bag
Screw
2 pcs
Wire Nut
7 pcs
Blade
Take cotter pin and cross pin off from downrod assembly.
1.Insert downrod assembly through canopy & yoke cover
as shown above.
2.Feed motor lead wires through downrod assembly.
3.Insert the downrod assembly into yoke.
4.Insert the cross pin through Yoke and downrod and
secure with Cotter Pin.
5.Tighten both set screws to further secure downrod.
6.Tighten hex nuts existing on set screws toward yoke
to prevent set screws from loosening.
7.Connect 9-pin connectors, pull down the yoke cover
& fasten jam screw on top of yoke cover.
P2
Hardware bag
Mounting Screw
2 pcs
Spring Washer
3 pcs
Lock Washer
3 pcs
Wood Screw
3 pcs
Tooth Washer
3 pcs
Blade Balance Kit
Wire Nut
4 pcs
Motor Screw
Screw For Spring
3 pcs
Leaf Spring
3 pcs
Outlet Box
Mounting
Bracket
4.
Install the mounting bracket
to outlet box in the ceiling
using the washers and the
mounting screws provided
in the hardware bag.
Do not use existing
mounting bracket
in the outlet box.
1 pc
9 pc
Advertisement
