Summary of Contents for Yosemite Zephyr
- Page 1 Owner’s Manual ZEPHYR WARNING : Read and follow these instructions carefully and be cautious of all warnings shown throughout.
- Page 2 READ AND SAVE THESE INSTRUCTIONS Warning: To avoid the risks of fire, electrical shock or injury, please observe the following: To ensure the correct and complete installation, be sure to read the instructions and review the diagrams carefully and thoroughly before beginning installation. If possible, mount the ceiling fan on a ceiling joist.
- Page 3 1. Unpack and inspect fan carefully to be certain all contents are included. Hardware bag Up Glass Shade Remote Control Mounting Screw 2 pcs Mounting Transmitter Bracket Spring Washer 3 pcs Suitable for use with solid - state speed control Lock Washer 3 pcs Wood Screw...
-
Page 4: Hanging The Fan
6. Up Glass Shade Assembly Glass Screws x 3 Spring Clip x 3 Up Glass Shade Canopy Yoke Cover Light Bulb x 4 Grill Gently install E-12 (4pcs.) Light bulbs on lampholders. Place the up glass shade onto grill & secure the glass shade with three glass screws / spring clips on grill. -
Page 5: Remote Control
II - Remote Control 1.Prepare the parts of the remote control. Receiver Transmitter Code Switches Code Switches 2. Setting the code on the transmitter. 2-1. Remove the battery cover of the remote control. 2-2. Slide code switches to your choice for an ON and OFF position. Use a small screwdriver to slide each of the switches. -
Page 6: Blades Installation
IV - Blades installation 1.Remove the plate at the light kit housing that covers the fan-shaped hole. 2.Insert the fan blades into the fan-shaped hole. 3.Secure the blade into the motor assembly by using the washer and the motor screws which are provided. 4.Repeat the steps 2-3 until 4 blades are assembled.