ASSEMBLY VOR-IC7000-G Step 1: Front Foot Attach the front foot (#7) to the frame using the (2) bolts (#3A) and (2) washers (#6) as illustrated in the diagram and then tighten the bolts. Step 2: Rear Foot Attach the rear foot (#2) to the frame using the (2) bolts (#3A) and (2) washers (#6) as illustrated in the diagram and then tighten the bolts.
INSTRUCTIONS FOR USE VOR-IC7000-G 1) The VOR-IC7000-G is designed to be used as an "indoor cycling" cycle in fitness studios and health clubs. It has a fixed wheel driven flywheel and should only be used under professional supervision. 2) Installation - It is important that the VOR-IC7000-G is correctly assembled and we recommend that installation and assembly be carried out by suitably qualified personnel.
Page 12
(10) years frame, five (5) years motor, three (3) years parts, two (2) years wearables and one (1) year labor from the initial install date. During this period, GREEN SERIES™ will repair or replace defective parts or equipment with new or reconditioned parts at GREEN SERIES™ option, without charge to customer.
3. GREEN SERIES™ shall not be held liable or responsible for any damages to the units caused during the install of any product.
Page 14
13. GREEN SERIES™ makes no warranty either expressed or implied regarding third-party (non-GREEN SERIES™) installed parts, accessories or modifications. 14. All GREEN SERIES™ equipment shall be properly cleaned and cared for in accordance to the procedures outlined the in the owner’s manual.
Page 15
(dependent on parts availability) via UPS. 3. GREEN SERIES™ will pay for shipping to and from the customer only within the time allocated under the warranty time-line following the original product installation date. Following this period all shipping fees for post warranty repairs are the sole responsibility of the customer.
Need help?
Do you have a question about the VOR-IC7000-G and is the answer not in the manual?
Questions and answers