Radio Mode Operations - Clarion DBZ45 Owner's Manual

I
Radio Mode Operations
FM Reception
For enhanced FM performance the
MfiGI-
TUtfE®
tuner includes signal actuated stereo control and
multipath noise reduction circuits.
Listening to the radio
1. Press the [FNC] button and select the radio
mode. then the radio will be on.
2. To select a preset band, press the [BND] but-
ton, then select one of the preset bands such
as FM1, FM2, FM3 or AM. Every time the [BND]
button is pressed, the display will change as:
FM1 ... FM2'" FM3 ... AM ... FM1
3. Press the
[< ...]
or
["->1
button to tune in the
desired station.
Manual Tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the [BND] button for 2 sec-
onds or longer, then the "MANU" is lit in the
display, which means that a manual selection
function is on.
3. Press the
[< ...]
or [..->] button to manually
tune in a station.
Seek Tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. If the "MANU" is lit in the display, press and
hold the [BND] button for 2 seconds or
longer. When the "MANU" display is off, the
seek tuning is now available.
3. Press the
[< ...]
or
[..->]
button to automatically
seek in a station.
Preset Memory Function
Preset Memory Function can store up to 24
stations: six stations for each of FM1, FM2, FM3
and AM.
12
08245
Manual memory function
1. Press the [BND] button, to select a band you
want to store in the memory.
2. Press the
[< ...]
or
[..->]
button to tune into a
desired station.
3. Press and hold one of the [DIRECT] button
for 2 seconds or longer to store the current
station into preset memory.
Auto store function
(Automatic Station Store)
1. Press [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the [PS/AS1 button for 2 sec-
onds or longer. The stations at which the re-
ception is the strongest will be automatically
stored in the memory.
Notes:
• When the auto store is performed, the station pre-
viously store in the memory at that position is
overwritten.
• When the number of stations stored is less than
six, the previous content of the memory for each
direct button will be retained.
Preset Scanning (Preset Station
Scan)
When the [PS/AS] button is pressed, the "SCN"
will be indicated with preset memory numbers
and the stations are tuned in for 7 seconds each
in the order in which they were stored. Press the
[PS/AS] button again to cancel the preset scan-
ning mode.
Instant Station Recall (ISR)
With this function, a specific radio station can be
recalled from any mode.
ISR memory
1. Press the [FNC] button, then select the radio
mode.
2. Select the radio station which you want to
store in the memory.
3. Press and hold the [ISR] button for 2 sec-