Note
•
Do not touch the pleated filter surface, or smell
the filter as it has collected pollutants from the air.
•
Wash your hands after disposing of the used
filters.
4
Remove all packaging material from the
new filters.
5
Place the new HEPA filter in the purifier
first.
6
Then, place the new activated carbon filter
in the purifier.
7
Place the pre-filer in the purifier.
Note
•
Make sure that the side with the two projections
is pointing towards you, and that all hooks of the
pre-filter are properly attached to the purifier.
8
To reattach the front panel, insert the top
hooks into the top of the purifier first (1).
Then, push the panel against the body of
the purifier (2).
1
9
Reset the activated carbon filter and the
HEPA filter lifetime (see 'Reset the filter
lifetime counter').
2
EN
17