Clean Your Air Purifier; Clean The Air Purifier; Clean The Air Quality Sensor - Philips AC4012 User Manual

5 Clean your air
purifier
Note
•
Always unplug the purifier before you clean it.
•
Never immerse the purifier in water or any other
liquid.
•
Never use abrasive, aggressive, or flammable
cleaning agents such as bleach or alcohol to clean
any part of the purifier.
•
Only the pre-filter is washable. Other air purifier
filters are NOT washable nor vacuum cleanable.
Clean the air purifier
Regularly clean the inside and outside of the
purifier body to prevent dust from collecting.
1
Wipe away dust with a soft dry cloth from
the body of the purifier.
2
Clean the air inlet and the air outlet with a
soft dry cloth.

Clean the air quality sensor

Clean the air quality sensor every 2 months for
optimal functioning of the purifier. Clean it more
frequently if you use the purifier in a dusty
environment.
Note
•
When the humidity level in the room is very high,
it is possible that condensation develops on the air
quality sensor. As a result, the air quality light may
indicate that the air quality is bad even though it is
good. In this case you have to clean the air quality
sensor or use one of the manual speed settings.
1
Clean the air quality sensor inlet and the
air quality sensor outlet with a soft brush.
2
Remove the air quality sensor cover.
3
Clean the air quality sensor, the dust inlet
and the dust outlet with a lightly moistened
cotton swab.
4
Dry the air quality sensor, the dust inlet
and the dust outlet with a dry cotton swab.
5
Reattach the air quality sensor cover.
EN 13