Listen To Fm Radio - Philips BTB2462 User Manual

5
Repeat the above steps to store more
DAB+ stations.
6
Press ALBUM/PRESET
manually stored station, and then press OK
to confirm.
Note
•
To remove a pre-stored DAB+ radio station, store
another station in its place.
Show DAB+ information
While listening to DAB+ radio, press INFO
•
repeatedly to scroll through the following
information (if available):
• Station Name
• RDS TEXT message
• Dynamic Label Segment
• Program Type
• Ensemble Name
• Frequency
• Signal error rate
• Bit rate
• Audio status (DAB, DAB+)
• Time
• Date
Use DAB+ menu
1
In DAB+ mode, press
DAB+ menu.
2
Press / to scroll the menu options:
• [FULL SCAN] (full scan): scan and
store all the available DAB+ radio
stations.
• [MANUAL] (manual): tune to a DAB+
station manually.
• [PRUNE] (prune): remove all the
invalid stations from the station list.
• [SYSTEM] (system): adjust system
settings.
3
To select an option, press OK.
/ to select a
/MENU to access
4
If a sub-option is available, repeat steps
2- 3.
[SYSTEM] (system)
• [RESET] (reset): reset all settings to
factory default.
• [UPGRADE] (upgrade): upgrade
software if available.
• [SW VER] (software version): show the
software version of this unit.
Note
•
If no button is pressed within 30 seconds, the menu
exits.

Listen to FM radio

Tune to a radio station
1
Press DAB/FM repeatedly to select the
tuner source.
2
Press and hold
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press / repeatedly until you find
optimal reception.
Store FM radio stations automatically
Note
•
You can store a maximum of 20 preset radio stations
(FM).
1
In tuner mode, press
the FM tuner menu.
» [SCAN] is displayed.
2
Press OK, and then press
the menu options:
/ for 3 seconds.
/MENU to access
/ to scroll
EN 13