Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips MCD1065 User Manual

6 Listen to radio

Tune to a radio station

1
Press )0.

Press and hold
two seconds.
» >6($5&+@ (search) is displayed.
» The radio tunes to a station with
strong reception automatically.

Repeat step 2 to tune to more stations.
‡ To tune to a weak station, press
UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO
reception.
‡ 7R DFKLHYH VRXQG TXDOLW\ SUHVV OK on
remote control repeatedly to select
stereo or mono sound.
Tip
‡
Position the antenna as far as possible from TV, VCR, or
other radiation source.
‡
For optimal reception, fully extend and adjust the
position of the antenna.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
In FM mode, press and hold 352*&/2&.
6(7 over two seconds to activate automatic
program mode.
» >$872@ (auto) is displayed.
» All available stations are programmed.
» 7KH ÀUVW SURJUDPPHG UDGLR VWDWLRQ LV
broadcast automatically.
/ on the unit over
/
Program radio stations
manually
Note
‡
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.

Press 352*&/2&. 6(7 to activate
program mode.
» >352*@ (program) begins to blink.

Press / to allocate a number (1 to 20)
to this radio station, and then press 352*
&/2&. 6(7 WR FRQÀUP

Repeat the previous steps to program
other stations.
Note
‡
To overwrite a programmed station, store another
station in its place.
6HOHFW D SUHVHW UDGLR VWDWLRQ
In FM mode, press /
number.
to select a preset
EN 15