Philips BTB2462 User Manual page 16

• [STRONG] (strong stations): scan
stations with strong signals only.
• [ALL] (all stations): scan all available FM
radio stations.
3
Press OK to select an option, and then
press /MENU to exit the menu.
4
In FM tuner mode, press and hold
CLOCK/SCAN.
» The stations scanned are based on the
selection in step 2.
» The unit broadcasts the first scanned
FM radio stations.
Store FM radio stations manually
1
Tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press ALBUM/PRESET
to select a radio frequency.
4
Press PROG again to confirm.
» The frequency of the preset station is
displayed.
5
Repeat the above steps to store more FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
• In FM mode, press ALBUM/PRESET
to select a stored radio frequency, and
then press OK to confirm.
Show RDS information
Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
14 EN
/ repeatedly
/
1
Tune to an RDS station.
2
Press INFO repeatedly to scroll through
the following information (if available).
• Radio text message
• Program type
• Frequency
• Stereo/Mono
• Time
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
• In FM tuner mode, press OK to switch
between mono and stereo broadcast.
» [ST] (Stereo) is displayed when the
radio station is stereo broadcast.