Table of Contents
Advertisement
Symptom
1. Operation Mode Selector is set to
2. If using a TV, wrong channel is selected
No Image is present
3. Not connected properly
4. Wrong TV system
1. Software is not installed
Cannot open the
2. Not using Windows 98 with USB
Photo Album
1. Incorrect cable connection
Cannot transfer data
2. Camera is not turned on
1. CF Card is not formatted
CF Card error
2. Card memory exceeds 32 MB
1. Operation Mode Selector is in Camera
Cannot delete image
2. The image is protected
3. There are no images to delete
1. Camera is not powered on
"Device not ready"
2. USB not connected properly
OR
3. USB host controller problem
Connection Failure
4. USB data transfer error
5. Hardware compatibility problem
Cause
camera mode
connection
mode
Solution
1. Set selector to Playback mode
2. Set TV to correct channel for video
playback
3. Reconnect the cables
4. Use NTSC or PAL TV system only.
1. Install the software (see chapter 4)
2-1. Use Windows 98 as your Operating
system
2-2. Use RS-232 connection (see chapter 3)
1. Reconnect the cables
2. Turn on the camera
1. Reformat through DOS using CF Adapter
and PCMCIA slot.
2. Replace card with lower memory capacity.
1. Select Playback mode/Delete Menu
2. From Playback mode, unprotect the image
3. Have fun. Take pictures.
1. Power on the camera
2. Ensure USB cable is properly connected
3. Refer to the Control Panel/Systems/Device
Manager for more details
4. Unplug and reconnect the USB cable
5. Contact your computer vendor for help
39
Advertisement
Table of Contents
