Table of Contents
Advertisement
Symptom
1. Batteries not loaded correctly
No Power
2. Dead batteries
3. Wrong AC adapter
1. Low battery power
Sudden power failure
2. Auto Power Off function engaged
1. Operation Mode Selector set to
No capture when
Playback mode.
shutter is pressed
2. Memory is full.
1. Indoor fluorescent lighting
Inaccurate color
2. Indoor incandescent lighting
capture
3. Outdoor natural lighting
Not enough light
Image is too dark
1. Strong direct or reflected light
Image is too bright
2. Subject is too close to use flash and
large (F2.8) iris setting
Distance from subject is not correct.
Blurry or out of focus
Reflection of light (flash) off the retina of
Redeye
the human eye
Cause
1. Reinstall batteries
2. Replace batteries
3. Use only recommended AC adapter
1. Replace batteries
2. Turn power back on
1. Set Operation Mode Selector to Camera mode.
2. Delete images.
1. Change White balance to Indoor+ setting.
2. Change White balance to Indoor- setting.
3. Change White balance to Outdoor setting.
** We recommend using Auto White Balance**
1. Change Iris setting to
2. Use the flash (see Chapter 2)
1. Change Iris setting to
2. Change Iris setting to
** If using flash and subject is further than 1.2
Refer to the Specifications/Focus Range for
Change the Flash to 1 of 2 Redeye settings
*On-
*Auto-
Solution
(F2.8)
(F8.0)
(F8.0)
meters set Iris to
(F2.8) **
details.
38
Advertisement
Table of Contents
