Honda 1999 CR-V Reference Owner's Manual page 197

9. Start the engine and let it run for
about 30 seconds. Then turn off
the engine.
10.Check the level in the radiator,
add coolant if needed.
RESERVE TANK
11.Fill the reserve tank to the MAX
mark. Install the reserve tank cap.
12.Install the radiator cap, and
tighten it to the first stop.
13.Start the engine and let it run until
the radiator fan comes on two
times. Then stop the engine.
Cooling System
14.Remove the radiator cap.
15.Pour coolant into the radiator up
to the base of the filler neck and
into the reserve tank up to the
MAX mark.
16.Start the engine and hold it at
1,500 rpm until the radiator fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.
17.Install the radiator cap, and
tighten it fully.
18.If necessary, fill the reserve tank
to the MAX mark. Install the
reserve tank cap.
Maintenance