Honda 2004 Pilot Reference Owner's Manual page 98

Main Menu Table of Contents
Playing a CD, CD Changer
To Play a CD
With the ignition in the
ACCESSORY (I) or ON (II) position,
insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way and begin to play it.
You operate the CD player with the
same controls used for the radio.
The number of the track playing is
shown in the display. The system will
continuously play a CD until you
change modes.
To Change Tracks (SKIP)
Each time you press and release
/( ), the player skips forward
＋
to the beginning of the next track.
Press and release /( ) to skip
backward to the beginning of the
previous track.
To move rapidly within a track, press
and hold the /( ) or ＋
( ). You will see CUE or REW in
−
the display.
94
Comfort and Convenience Features
REPEAT
a track, press and release the RPT
button. You will see RPT in the
display. Press the RPT button again
to turn it off.
RANDOM
tracks in random order. To activate
Random Play, press and release the
RDM button. You will see RDM in
the display. This continues until you
press the RDM button again.
To Stop Playing a CD
Press the eject button (
remove the CD. If you eject the CD,
but do not remove it from the slot,
the system will automatically reload
the CD after 15 seconds and put it in
−
pause mode. To begin playing, press
the CD button.
Press the AM/FM button to switch
to the radio while a CD is playing.
/ Press the CD button to play the CD.
If you turn the system off while a CD
To continuously replay
−
This feature plays the
−
) to
I n f o r ma t i o n P r o v i d e d b y :
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the CD will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
Operating the Optional CD
Changer
A CD changer is available for your
vehicle. It holds up to six CDs. You
operate the CD changer with the
same controls used for the in-dash
CD player.
Load the desired CDs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit.
To select the CD changer, press the
CD button. The CD and track
numbers will be displayed. To select
a different CD, use the preset 5
(DISC − ) or preset 6 (DISC
button. If you select an empty slot in
the magazine, the changer will, after
finding that slot empty, try to load
the CD in the next slot.
＋ )