Table of Contents
Advertisement
Table of Contents
Main Menu
Lights
Headlight Aiming
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk, readjustment may be required.
Adjustments should be performed by
a Honda dealer or other qualified
mechanic.
Replacing a Headlight Bulb
Your vehicle has halogen headlight
bulb. Handle it by its steel base and
protect the glass from contact with
your skin or hard objects. If you
touch the glass, clean it with
denatured alcohol and a clean cloth.
NOTE: Halogen headlight bulbs get
very hot when lit. Oil, perspiration,
or a scratch on the glass can cause
the bulb to overheat and shatter.
180
Maintenance
CONNECTOR
BULB
1.
Remove the electrical connector
from the bulb by pulling the
connector straight back.
2.
Remove the rubber weather seal
by pulling on the tab.
I n f o r ma t i o n P r o v i d e d b y :
3.
Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
4.
Insert the new bulb and make sure
it is right side up. The tabs on the
base fit into the indentations in the
headlight assembly. Pivot the hold-
down wire back in place, and clip
the end into the slot.
5.
Reinstall the rubber seal and make
sure one of its arrow is pointing up.
6.
Push the electrical connector onto
the new bulb.
Hide quick links:
Advertisement
Chapters
Table of Contents
