Table of Contents
Advertisement
Main Menu
Table of Contents
Changing a Flat Tire
SPARE TIRE WRENCH
5.
The spare tire is stored
underneath the rear cargo area.
Remove the plastic cover on the
cargo area lining to access the
shaft for the spare tire hoist.
198
Taking Care of the Unexpected
BRACKET
6.
Put the wheel nut wrench on the
hoist shaft. Turn the wrench
counterclockwise to lower the
spare tire to the ground. Keep
turning the wheel wrench to
create slack in the cable.
7.
Remove the bracket from the
spare tire.
8.
Loosen each wheel nut 1/2 turn
with the wheel wrench.
I n f o r ma t i o n P r o v i d e d b y :
JACKING POINT
9.
Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by a
mark molded into the underside of
the body. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
△
Hide quick links:
Advertisement
Chapters
Table of Contents
