D-Link DVG-2001S Quick Installation Manual page 2

Connecting the VoIP Terminal Adapter to
your Computer
Power Input
Connect to AC
Adapter
A. First, connect the power adapter to the power input at the back
panel of the DVG-2001S and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of the
device, the Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into the Ethernet (LAN) port
on the back panel of the DVG-2001S and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
C. Insert a telephone cable into the Phone port, then connect the
cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that
the connections have been made.
LAN Ports
Connect to the
LAN and other
computers
Factory Reset button
2
Phone Connections
Connect to your phone
using standard phone
cabling