Samsung NP-R25 Series Service Manual page 76

Particulate Respirators (cont.)
3M Particulate Respirator 9210, N95
™
A breakthrough in comfort and convenience.
This three-panel respirator with innovative design
is uniquely designed to help provide comfortable,
reliable worker protection against non-oil based particles. Suggested
applications include grinding, sanding, sweeping, bagging, and other
operations that create dust. Uses would also include solids such as
those from textile operations, chemical handling, surface preparation,
food preparation and handling, woodworking, grain handling and milling,
processing of minerals, and certain other substances. It features a low
profile collapse resistant design and a soft nose foam pad. Respirators
are individually packaged to help prevent contamination during storage.
Product No. UPC No.
9210 500-51131-37021-5
3M Particulate Respirator 8511, N95
™
Ideally suited for work settings that involve
heat and humidity. Helps reduce exposure to
dust from sanding on particle board, drywall,
non-lead paints, fiberglass insulation dust.
Features the 3M Cool Flow Exhalation Valve,
™ ™
which offers easy exhalation and cool, dry comfort. M-noseclip
helps provide a secure seal and helps reduce eyewear fogging.
Product No. UPC No.
8511 N95 500-51138-54343-8
3M Particulate Respirator 9211, N95
™
A breakthrough in comfort and convenience.
This three-panel respirator with innovative
design is ideally suited for work settings that
involve heat, humidity, or long periods of wear.
Suggested applications include grinding, sanding, sweeping, bagging,
and other operations that create dust. Uses would also include solids
such as those from textile operations, dry chemical handling, surface
preparation, food preparation and handling, woodworking, grain handling
and milling, processing of minerals, and certain other substances.
It features a low profile collapse resistant design, 3M
Exhalation Valve, and a soft nose foam pad. Respirators are individually
packaged to help prevent contamination during storage.
Product No. UPC No.
9211 500-51131-37022-2
3M products shown on this page must be used in accordance with OSHA regulations and the user instructions, warnings and
limitations accompanying each product. Misuse of these products may result in sickness or death. For proper use, see supervisor,
user instructions, or call 3M Technical Support at 1-800-247-3941.
74
Case/Qty. Units Stock No.
240 Case 70-0708-4339-9
Case/Qty. Units Stock No.
80 Case 70-0707-5755-7
Cool Flow
™ ™
Case/Qty. Units Stock No.
120 Case 70-0708-4340-7
3M Particulate Respirator 8247, R95, with
™
Nuisance Level* Organic Vapor Relief
Designed to help provide comfortable protection
against certain oil and non-oil based particles
including those present with nuisance levels*
of organic vapors, such as solvents, degreasers, and resins.
Suggested applications include foundry operations, lab settings,
agriculture, petrochemical manufacturing and undercoating where
particles and nuisance levels* of organic vapors may be present.
Its lightweight construction promotes greater worker comfort and
contributes to increased wear time.
Product No. UPC No.
8247 500-51138-54358-2
* Nuisance levels refer to concentrations not exceeding OSHA PEL/OEL or applicable exposure
limits,whichever is lower.
3M Particulate Respirator 8246 with
™
Nuisance Level* Acid Gas Relief
8246, R95
Helps provide protection against certain oil
and non-oil based aerosol particles. Suggested
applications: glass etching, chemical processing,
paper processing, aluminum smelting, brewing operations.
Lightweight construction promotes greater worker comfort
and contributes to increased wear time.
Product No. UPC No.
8246 R95 500-51138-54357-5
* Nuisance levels refer to concentrations not exceeding OSHA PEL/OEL or applicable exposure
limits,whichever is lower.
3M Particulate Respirator 8271, P95
™
Combines P-series versatility with exceptional
comfort and fit. An excellent choice for those
who have work environments that may contain
oil aerosols. Features the 3M Cool Flow
™
Valve, comfortable faceseal and M-noseclip to help provide a custom
fit and secure seal. Workplace applications: grinding, sanding, sweeping,
bagging, machining, other dusty/oily operations.
Product No. UPC No.
8271 P95 500-51138-54285-1
Case/Qty. Units Stock No.
120 Case 70-0707-5772-2
Case/Qty. Units Stock No.
120 Case 70-0707-5771-4
Exhalation
™
Case/Qty. Units Stock No.
80 Case 70-0707-1083-8