Mercury motorguide R3-30 Manual page 18

TROLLING MOTOR INSTALLATION AND OPERATION
2. When the desired tilt position is achieved, release the tilt lock
release pin/lever. Verify that the latch pin is securely engaged.
a
a - Tilt lock release lever (R3‑45 and R3‑55 model shown)
b - Latch pin
c - Tilt lock release pin (R3‑30 and R3‑40 model shown)
DEPLOYING THE MOTOR
Moving parts, such as hinges and pivot points, can cause serious
injury. Keep away from moving parts when stowing, deploying, or
tilting the motor.
c
b
CAUTION
!
14
b
45134