How To Disassemble - Mr. Coffee BVMC-FPK Series User Manual

How To Disassemble

1
To dismantle, turn plunger
handle in counterclockwise
direction while firmly
grasping filter assembly with
other hand.
2
Turn until plunger lid
separates from filter
assembly.
3
Place plunger lid aside.
Dismantle filter assembly layer
by layer until all parts are
separated out.
4
Clean each part with
warm soapy water and
dry thoroughly. Never use
abrasive cleansers, steel
wool pads or other abrasive
materials.
BVMC-FPK Series_15ESM1.indd 14-15
-14-
How To Reassemble
1
Carefully place mesh insert into
lower filter ensuring screw hole in
mesh is lined up.
2
Add spring over mesh insert.
3
Add upper filter over spring.
4
Affix plunger lid to the filter assembly
by lining up screw hole on filter
assembly to end of the plunger
handle.
5
Firmly grasp plunger handle and filter
assembly together in one hand and turn
handle clockwise with other hand until
secure.
-15-
4/14/15 1:43 PM