Table of Contents
Advertisement
TE/Speed
By pressing this key once the speed limitation for sewing mode is activated.
By pressing the key twice ( within 5 seconds ) the machine switches to parameter input
mode. In the parameter input mode the lettering "TE" is displayed on the control panel. In the
alpha-numerical section of the display the parameters are listed with their corresponding
values, see Chapter 12.06 Parameter settings.
Scrolling
When this key is pressed, it is possible to scroll through the input menus on the display.
PM
By pressing this key the Programmed Sewing function is switched on or off. When the
function is switched on, the lettering "PM" appears in the display of the control panel.
The parameters of the programs are shown in the alpha-numerical section of the display.
F1
This key has no function.
F2
This key has no function.
F3
This key has no function.
F4
After this key has been pressed, the next bartack will not be sewn.
Controls
7 - 5
Advertisement
Table of Contents
