Husqvarna EZ24T Operator's Manual page 27

Press in and turn the ignition key to the start position.
When the engine starts, immediately release the
ignition key back to the run position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
Set the desired engine speed with the throttle.
Allow the engine to run at a moderate speed, "half
throttle" for 3-5 minutes before loading it too heavily.
USE FULL THROTTLE WHEN MOWING (no choke).
WARNING!
Engine exhaust and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive system damage. The
engine exhaust contains carbon
monoxide, which is a odourless,
colourless, poisonous gas. Do not
use the machine in enclosed spaces.
OPeRAtIOn
Turn to the start position
Return to run position
Set the engine speed
8050-7432
8050-7432
8052-001
27
Husqvarna-