Dishwasher Feedback - Maytag MDB4949SDM User Instructions

Hide thumbs Also See for MDB4949SDM:
Table of Contents

Advertisement

Available languages

Available languages

Dries dishes with heat and the fan (on some cycles).
Use this option with rinse aid. Plastic items are
less likely to deform when loaded in top rack. Turn
option off for an air dry.
NOTE: The fan may run for 1 hour after the cycle
ends for some cycle/option selections. The fan can
be stopped by opening the door or pressing any
key on the console.
CONTROL
Press to start or resume
a wash cycle.
Press to cancel wash cycle.
Control Lock avoids
unintended use of
dishwasher between
cycles or cycle and option
changes during a cycle.
To follow the progress
C
of the dishwasher cycle.
B
A
On some models
Front panel
indicator light
OPTIONS

Dishwasher Feedback

PURPOSE
If the door is opened during a cycle or power is interrupted, Start/Resume
indicator light flashes. Cycle will not resume until door is closed and Start/
Resume is pressed.
NOTE: Push door firmly closed within 4 seconds of pressing Start/Resume.
If door is not closed within 4 seconds, the Start/Resume button LED will flash,
an audible tone will be heard, and cycle will not start.
Close door firmly. The dishwasher starts a 3-minute drain (if needed). Let
dishwasher drain completely.
To turn on Lock, press and hold SANITIZE for 3 seconds. Control Lock LED will
stay on, indicating that it is activated and all buttons are disabled. If you press
any button while your dishwasher is locked, LED flashes 3 times. Dishwasher
door can still be opened/closed while controls are locked.
To turn off Lock, press and hold SANITIZE for 3 seconds. LED turns off.
Progress will be displayed by a status display and by an indicator light on the
front panel.
The status display will glow for Wash (A), Dry (B), Sanitized, or Clean. It will also
show the estimated remaining time for the cycle.
Depending on the model, the front panel indicator will glow green when the
dishwasher is running and will go off when the cycle is complete or the indicator
light will glow blue for wash, red for dry, and green for cycle complete.
Depending on the model, an indicator light on the front of the door panel will
glow green when a cycle is running and turns off when the cycle is complete.
CAN BE
WHAT IT DOES ADDED
SELECTED
WITH
PowerBlast
Uses heating
®
element and the
Auto
fan (with some
Normal
cycles) to speed
Quick
drying times.
COMMENTS
ADDED
TIME TO
WATER
CYCLE
GALLONS
(LITERS)
:12 to :46
0
9

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents