Denon AVR-X2200W Owner's Manual page 146

Contents Connections
o Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto:
Low / Medium / High:
Off:
0 "Dynamic Compression" can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD or Dolby Atmos signal is input.
0 The default setting is "Off". When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is "Auto".
o Dialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these
can be heard more easily.
0 – 6 (Default : 0)
0 This can be set when a DTS:X signal that is compatible with the Dialog
Controll function is input.
Front panel Display
Playback
Automatic dynamic range compression
on/off control according to source.
These set the compression level.
Dynamic range compression is always
off.
Rear panel
Settings
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default : 0 dB)
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
146
Remote
Tips Appendix
Index