Mitsubishi Electric MUH-GA50VB-E1 Service Manual page 37

11-2. MUH-GA60VB MUH-GA80VB
OUTDOOR UNIT
OPERATING PROCEDURE
1.Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Remove the screws of the front panel.
(8) Remove the front panel.
(9) Remove the screws of the back panel.
(10) Remove the back panel.
Photo 3
Screws
of the
back
panel
Set screws of the back panel
2. Removing the deicer P.C. board
(1) Remove the service panel and the cabinet.
(2) Disconnect all the connectors and the terminals on the
deicer P.C. board.
(3) Remove the deicer P.C. board.
Screw of the motor support
NOTE : These photos are MUH-GA80VB.
MUH-GA60VB is almost the same as MUH-GA80VB.
Photo 1
Screws
of the
cabinet
Photo 2
Screw of the service panel
Screws
of the
front
panel
Photo 4
Screws
of the
relay
panel
37
PHOTOS
Screw of the top panel
Screws of the cabinet
Screws
of the
top
panel
Screw
of the
valve
cover
Deicer P.C. board
Terminal
Screws of the
relay panel
blocks