Programming The Mx-880Z; Selecting A New "Activity - Universal MX-880Z Owner's Manual

Programming the MX-880Z

The MX-880Z is programmed via a Windows PC equipped with a USB
port (programming cable included), using our proprietary software, MX-
880Z Editor.
To fully automate an audio/video system the programmer must have a
detailed knowledge of each component and how the system is connected
and operated. We highly recommend that you use a professional
audio/video installer to program your MX-880Z so you will be able to
enjoy all the benefits of the MX-880Z.

Selecting a New "Activity"

The MX-880Z's WATCH and LISTEN buttons display the activities you can
control with your MX-880Z. When you want to watch something else (a
DVD movie, a videotape or an HDTV broadcast), simply press the
WATCH button and select the new activity. When you want to listen to
the radio or to a CD, touch the LISTEN button and select what you would
like to listen to.
Your installer will have programmed the button you pressed to totally con-
figure your system to watch or listen to whatever you selected. Now, the
screen will change, and all of the LCD buttons will be reconfigured to
give you full control of your system while watching or listening to your
selection!
When you press the LISTEN button,
you can see the most frequently used
activities you have for listening in
your system.
Press either of the PAGE buttons to see any other available choices.
M -880Z M
X AND RZ
PAGE DISPLAY
At the bottom
of the LCD
screen, the
page display
informs you if
there are other
pages of but-
tons available.
Page 4
-260 O M
WNERS ANUAL
When you press the WATCH but-
ton, you can see the most fre-
quently used activities you have
for watching the sources in your
system.