Using The Manual; Contents Of Kit/Parts Layout; Required Radio Equipment - E-FLITE Enticement F3P Assembly Manual

Using the Manual

This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed next
to each step to keep track of each step completed. Steps with
a single circle () are performed once, while steps with two
circles ( ) indicate that the step will require repeating, such
as for a right or left wing panel, two servos, etc.
Remember to take your time and follow the directions.

Contents of Kit/Parts Layout

Replacement Parts
EFL1176 Motor Mount/Firewall
EFL1177 Carbon Pushrod Set
EFL1178 Carbon Bracing and Landing Gear
EFL1179 Wheel Pants
EFL1180 Pushrod Supports (Wood)
EFL1181 Landing Skids, 2.5mm
E-flite Enticememt F3P Profile Assembly Manual

Required Radio Equipment

You will need a minimum 6-channel transmitter (for proper
mixing and dual rate capabilities), crystals, micro receiver,
and three sub-micro servos. You can choose to purchase a
complete radio system that includes all of these items or, if
you are using an existing transmitter, just purchase the other
required equipment separately. We recommend the crystal-free,
interference-free Spektrum ™
system. If using your own transmitter, we recommend the use of
a JR SPORT ™ 6-channel UltraLite receiver and E-flite
Sub-Micro servos for 72MHz users or the Nanolite 6-channel
flight pack for Spectrum users.
For Spectrum DX7 users
SPMAR6300F DSM2 6CH Nanolite Flight Pack
For 72MHz users
JRPR610UL** R610UL 6CH FM, Shrinkwrap
FM Receiver (72MHz)
EFLRS60 6.0-Gram Super Sub-Micro Servo (3)
If you are using a Spectrum DX6
SPM6000 AR6000 DSM 6-Channel Park
Flyer Receiver
EFLRS60 6.0-Gram Super Sub-Micro Servo (3)
DX7 2.4GHz DSM2 ™ 7-channel
® S60 Super
3