Motor Installation - E-FLITE Enticement F3P Assembly Manual

Motor Installation

Required Parts
Assembled airframe
Motor w/hardware
Propeller
Motor battery
Required Tools and Adhesives
Foam-safe CA
Hobby knife
1. Use foam-safe CA to attach the firewall to the

fuselage. The opening for the motor leads is on the
left-hand side of the aircraft from the pilots perspective
toward the bottom. (Make sure to locate the firewall as
pictured below.)
24
Carbon firewall
Speed control
Hook and loop tape
Foam-safe CA activator
Phillips screwdriver: #0
2. Use a hobby knife to remove the foam from the

firewall in the location for the motor leads and in the
center of the firewall as well.
3. Attach the motor mount to the firewall using the

hardware provided with the motor and a #0 Phillips
screwdriver.
E-flite Enticement F3P Profile Assembly Manual